The electromechanical machine for bending metal pipes and rolled by running cold. Universal bending machine can be used for bending pipes: – water and gas steel pipes, gost 3262 – 75. – (Diameter 1 / 2''to 2 ', the wall thickness from 2,5 to 4,5 mm), grade of steel from the CT-3 to CT-45 – seamless steel pipe cold, gost 8734-75 (d 20 to 60 mm, wall thickness from 2 to 5 mm), grade of steel from the CT-3 to CT-20 – hot-rolled seamless steel pipes, gost 8732-70 (d 25 to 60 mm, wall thickness from 2,5 to 5 mm) steel grades either – seamless, cold and warm tubes of corrosion resistant (stainless) steel, gost 9941-81 (the outer diameter of 20 to 60 mm, wall thickness from 2 to 5 mm), steel grade, any gost 5632-72; welded tubes from carbon and steel, gost 10704-76, gost 11068-8 (d 25 to 60 mm wall thickness from 2,5 to 5 mm), grade of steel from the CT-3 to CT-20; 08Cr18Ni10Ti, 12X18H10T, 10X17H13M2T etc. – seamless tubes for engineering purposes according to tu 14-157-35-94 (d 25 to 60 mm thick wall from 2.5 to 5 mm), steel grade, any of the CT-3 to CT-45 – boiler pipes tu 14-3-460-75 (d 20 to 60 mm wall thickness from 2 to 5 mm), grade steel 12H1MF, 20X – copper pipes gost 617-90 (d 20 to 60 mm, wall thickness from 2 to 5 mm) – brass tubes gost 494-90 (d 20 to 60 mm, wall thickness from 2 to 5 mm) – shaped pipes gost 8639-57, gost 8645-57, (steel grade any of the CT-3 to CT-45, size 16 to 50 mm, wall thickness from 1,5 to 3,5 mm)